TRIBOLUBE® 71 Grease is 100% oxygen compatible, and qualified to MIL-PRF-275617 Types I, II, and III. Testing data is available for heat of combustion (HOC), Autogenous ignition testing (AIT), and pneumatic impact testing preformed by NASA WSTF, WPAFB, and BAM in Germany. TRIBOLUBE® 71 is consistently the oxygen grease divers trust over their old grease. TRIBOLUBE® 71 is excellent for and is recommended in static and dynamic applications. TRIBOLUBE® 71 has a wide temperature operating range and has no problem working in -100°F to 550°F. Technicians’ report seeing something unique about a regulator lubricated with TRIBOLUBE® 71. “During our annual maintenance I was surprised, the grease didn’t dry out, leave a cookie dough residue, or white scale behind.” One surprised Tech told us “I started the annual maintenance and had to cross check the regulators serial number in the servicing log. The equipment had been in service for a whole year, but it looked like the TRIBOLUBE® 71 had just been applied!” “I’ve never seen anything like it! I’m a customer for life, and wouldn’t use anything else!” The grease was used to lubricate critical areas of a rebreather prior to an arctic dive. The air temperature was around -35°F and the water was -2°F. “The oxygen grease I used before would gel and thicken up in these conditions. We commonly saw the DSV freeze up with the other grease, which would stick the DSV open sometimes. This made it physically was impossible to rotate, but in every test TRIBOLUBE® 71 performed as if it were at room temperature. When we lubricated the DSV with TRIBOLUBE® 71 the movement was smooth and easy even at -2° F.!” “I contacted Aerospace Lubricants, Inc. to inquire about being a distributor, because I won’t ever use anything else in my gear!”